Welcome to our site! Home » Products » Audio&Video Series » Extender Series » HDMI Extender » HDMI 100m Extender Over Coaxial With IR(3D Full HD 1080P)

Product Category

HDMI 100m Extender Over Coaxial With IR(3D Full HD 1080P)

Share to:
HDMI to SDI extenders, HDMI signal can be transmitted over long distances via a single coaxial cable, which has extended transmission speed, uncompressed, zero latency, etc., can greatly reduce the cost of long-distance transmission of HDMI signal transmission distance of 100-300 meters.
  • T-509A
  • Zenhon

1)Package contents

Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton:

HDMI Extender TX----------------------------------------x1

HDMI Extender RX----------------------------------------x1

IR TX---------------------------------------------------x1

IR RX---------------------------------------------------x1

5V1A DC Power Supply Adaptor----------------------------x2

Operation Manual----------------------------------------x1

2) Features

1. SDI interface operates at bit rates of 2.970 G bit/s, 2.970/1.001G bit/s, 1.485 G bit/s, 1.485/1.001G bit/s and 270 Mb/s.

2. Supports HDMI input timings: 480i@59.94, 576i, 720p@50/59.94/60,1080i@50/59.94/60,1080p@23.98/24/25/29.97/30/50/59.94/60.


(3.1) 480i/576i to SD-SDI (SMPTE 259M-C, at bit rates of 270 M bit/s) 720p/1080i to HD-SDI (SMPTE 292M, at bit rates of 1.485 G bit/s or 1.485/1.001 G bit/s)

(3.2 )1080p to 3G-SDI (SMPTE 424M/425M-AB, at bit rates of 2.970 G bit/s and 2.970/1.001 G bit/s)

4. SDI Extender supports distance between TX to RX:100 meters (3G-SDI),200 meters (HD-SDI), or 300 meters (SD-SDI)


1.0 Specifications

TX Input Port--------------------------------------------------------------------1 x HDMI

TX Output Port-------------------------------------------------1 x BNC (SDI/HD-SDI/3G-SDI)

RX Input Port--------------------------------------------------1 x BNC (SDI/HD-SDI/3G-SDI)

RX Output Port-------------------------------------------------------------------1 x HDMI

SDI Transmission Rates------------------------------2.970 G bit/s and 2.970/1.001 G bit/s

In/Output Resolution----------------------480i, 576i, 720p@50/59.94,60 ,1080i@50/59.94/60


Power Supply------------------------------------------------------------------------DC 5V

ESD Protection Human body model ---------------------------------±8kV (air-gap discharge)

                                                                 ±4kV (contact discharge)

Dimension------------------------------------------------------------82mm x 43.5mm x 23 mm


Operating Temperature----------------------------------------0°C ~ 40°C / 32°F ~ 104°F

Storage Temperature--------------------------------------- -20°C ~ 60°C / -4°F ~ 140°F

elative Humidity--------------------------------------------  -20 ~ 90% RH (Non-condensing)

Power Consumption (Max)-----------------------------------------------------------------5W


2.0 Panel descriptions

Please study the panel drawings below and become familiar with the signal

input(S),output(S)and power requirements.

Transmitter Panel

HDMI INPUT ------------------------------- HDMI input Interface

IR OUTPUT ----------------------------------- IR output Interface

SDI OUTPUT ------------------------------- SDI output Interface

Status --------------------------------------- Input Status Indicator

PW--------------------------------------------------- Power Indicator

DC 5V-------------------------------------------5V Power Interface


Receiver Panel

DC 5V-----------------------------------------5V Power Interface

IR INPUT -------------------------------------- IR Input Interface

PW------------------------------------------------- Power Indicator

Status---------------------------------------Input Status Indicator

SDI INPUT ---------------------------------SDI output Interface

HDMI OUTPUT --------------------------HDMI input Interface


3.0 Installation and Operation

3.01Connect the HDMI cable between TX and HDMI Source;

3.02 Connect SDI cable between TX and RX;

3.03 Connect the HDMI cable to RX and HDMI terminal display;

3.04 TX and RX respectively connected to power adapter;

3.05 Open the HDMI source and HDMI display device power products began to work.



To avoid electric shock , product damage and to protect your safety , please notice the following:

1. Please slowly plug or unplug signal cables and do not often plug , unplug , or shake them.

2. 2.The equipment should not be placed under the sun , rain and damp or  unventilated environment.

3. Liquid items should not be placed on the equipment.

4. Do not install the equipment near heat sources such as fire , power , or other amplifiers that produce heat.

5. Do not insert the metal or other objects to the equipment in addition to connecting cables to ports.

6. Do not demolish the equipment by yourself ; it should be maintained by professional maintenance staff.

Contact us
 Shenzhen Parent Factory: 3 Floor, Building D,Taidezhichuang Park, NO.23 Changdong Road, Huangjiang Town, Dongguan, Guangdong, China
 Tel: 86-755-27080020
 Changzhou Subsidiary: 87# Gantang Road, Lijia Town, Wujin District, Changzhou City, China
 Tel: +86-519-89198660
Copyright © 2018 Shenzhen Zenhon Technology Co.,Ltd. All right resolved.              Support By Bullnet  Manage Entrance