Welcome to our site! Home » Products » Audio&Video Series » Splitter Series » DVI Splitter » DVI 1x8 Splitter 4K

Product Category

DVI 1x8 Splitter 4K

Share to:
The products are designed to make your A/V device use more convenient, comfortable, productive and cost-efficient.The DVI splitter can allow multiple video display units connected to one DVI Source and display the same HD picture at the same time. So that you can share one signal source, greatly reduce the cost of system.Our devices offer solutions for noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.
  • T-DV108A
  • Zenhon

1) Packaging accessories:

1. DVI 1×8 Splitter---------------------------------------------------1 Pcs

2. 5V DC Power Adaptor---------------------------------------------1 Pcs

3. User Manual-------------------------------------------------------1 Pcs

2) Features:

1. 1X DVI-D input and 8 DVI-D outputs.

2.Support dual Link DVI-D signal transmission, resolution up to 3840X2160@30Hz.

3.Support resolution 640X480@60Hz to 3840X2160@30Hz, compatible with the 1920x1200 standard.

4.Support for long distance signal transmission.

5.Installs in minutes, No loss of quality.

6.Metal casing design and overall shielding without signal interference.

7.LED indicates signal and power mode.

8.Supports wide range voltage DC input (DC5V~12V).

1.0 Technical parameters

DVI interface type ---------------------------------------------------------------------Dual link DVI-D

Single link input/output resolution------------------------------------------up to 1920x1080@60Hz

Dual link input/output resolution--------------------------------------------up to 3840x2160@30Hz

Support video color format----------------------------------------------24bit/deep color 30bit,36bit

Max signal bandwidth-------------------------------------------------------------------------340MHz

Max baud rate-----------------------------------------------------------------------3.4Gbps Serial Link

Input/Output TMDS signal-------------------------------------------------------0.5~1.5Volts p-p(TTL)

Input/Output DDC signal---------------------------------------------------------------5Volts p-p (TTL)

DVI input cable distance --------------------------------------≤10m AWM 20276 DVI standard cable

DVI output cable distance ------------------------------------≤10m AWM 20276 DVI standard cable

Power adapter -------------------------------------Input:AC 110~240V 50/60Hz Output: DC 5V 3.5A

Power Consumption(max.)---------------------------------------------------------------------6.5Watts

Operating Temperature range-------------------------------------------------------------- -5 to +45℃

Storage Temperature range--------------------------------------------------------------- -15 to +55℃

Operating Humidity range--------------------------------------------10 to 90%RH (No Condensation)

Storage Humidity range------------------------------------------------5 to 95%RH (No Condensation)


Case Dimension :L×W×H(mm):-------------------------------------------------------------432x130x44.5

2.0 Panel Introduction

(1)L1-L8 ------------------------------------------Output 1-8 Status

(2)POWER --------------------------------------------Power Status

(3)ON/OFF --------------------------------------------Power button

(4)DC5~12V -------------------------------------Power Input Port

(5)OUTPUT1-8------------------------------------Output Port 1-8

(6)DVI INPUT --------------------------------------------Input Port

3.0 Connection diagram

3.1 Connect one dual link DVI-D cable from a DVI signal source into the input port of splitter.

3.2 Connect dual link DVI-D cables from TV/Monitor into the DVI output ports of splitter.

3.3 If the resolution is higher than 1920X1080@60Hz, you must use a dual link DVI-D cables,

   the signal source and the display must be able to support this resolution.

3.4 Connect DC plug of AC adapter to DC jack and inserted into the power socket.

Explanation: With different brands of the input or output device, the length of the

connecting cables will differ too.

4.0 Installation and Precautions

To avoid electric shock , product damage and to protect your safety , please notice the following:

1.Please slowly plug or unplug signal cables and do not often plug , unplug , or shake them.

2.The equipment should not be placed under the sun , rain and damp or unventilated environment.

3.Liquid items should not be placed on the equipment.

4.Do not install the equipment near heat sources such as fire , power , or other amplifiers that produce heat.

5.Do not insert the metal or other objects to the equipment in addition to connecting cables to ports.

6.Do not demolish the equipment by yourself ; it should be maintained by professional maintenance staff.

Contact us
 Shenzhen Parent Factory: 3 Floor, Building D,Taidezhichuang Park, NO.23 Changdong Road, Huangjiang Town, Dongguan, Guangdong, China
 Tel: 86-755-27080020
 Changzhou Subsidiary: 87# Gantang Road, Lijia Town, Wujin District, Changzhou City, China
 Tel: +86-519-89198660
Copyright © 2018 Shenzhen Zenhon Technology Co.,Ltd. All right resolved.              Support By Bullnet  Manage Entrance