| Quantity: | |
|---|---|
1.0 Packaging accessories:
(1)SDI TO HDMI CONVERTER------------------------------1Pcs
(2)5V DC Power Adaptor---------------------------------------1Pcs
(3)User Manual---------------------------------------------------1Pcs
2.0 Features
1) Operation at 2.970Gbit/s, 2.970/1.001Gbit/s, 1.485Gbit/s, 1.485/1.001Gbit/s and 270Mbits/s.
2)Supports SMPTE 425M (Level A and Level B), SMPTE 424M,SMPTE 292M,SMPTE 259M-C.
3)Equalized and re-clocked loop output• Integrated audio de-embedder for a maximum of 8 channel, 48 kHz audio.
4)Auto video mode detection (3G/SD/HD)
5)Conversion from SMPTE 425M level B to Level A 1080p 50/59.94/ 60 4:2:2 10-bit.
6)Connect with other units to extend your signal over long distances.
7)Simultaneous display with SDI and HDMI signals
8)Supports signal transmission distances of up to 300M for SDI signals, 200M for HD signals and 100M for 3G signals
1.0 Specifications
Input Port -----------------------------------------------1 x BNC (SDI/HD-SDI/3G-SDI)
Output Ports--------------------------------------------1 x HDMI, 1 x BNC (SDI/HD-SDI/3G-SDI)
SDI Transmission Rates----------------------------2.970 Gbit/s and 2.970/1.001 Gbit/s
In/Output Resolution----------------------------------480i, 576i, 720p@50/59.94,60 ,1080i@50/59.94/60
1080p@23.97/24/25/29.97/30/50/59.94/60
Power Supply-------------------------------------------DC 5V
ESD Protection Human body model --------------±8kV (air-gap discharge)±4kV (contact discharge)
Dimension-------------------------------------------------100mm x 65mm x 25mm
Weight------------------------------------------------------200g
Operating Temperature--------------------------------0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature----------------------------------20°C ~ 60°C / -4°F ~ 140°F
Elative Humidity-----------------------------------------20 ~ 90% RH (Non-condensing)
Power Consumption (Max)---------------------------5W
2.0 Panel introduction
Please study the panel drawings below and become familiar with the signal input(s), output(s) and power requirements.
SDI LOOP -------------------SDI Output interface
PW -----------------Power Input Status Indication
Status -----------------SDI Input Status Indication
SDI IN ----------------------------SDI Input interface
DC 5V-------------------------Power Input interface
HDMI OUTPUT -----------HDMI Output interface
3.0 Connection and operation
3.01 Connect the Coaxial Cable between SDI signal source and SDI INPUT
of converter.
3.02 Connect the Coaxial Cable between converter and SDI display.
3.03 Connect the HDMI Cable between converter and HDMI display.
3.04 Connect the power adapter between converter and outlet.
3.05 Open the power supply of HDMI signal source and the display. Choose
corresponding input ports, then it works.
