PRODUCTS
Welcome to our site! Home » Products » Audio&Video Series » Splitter Series » HDMI Splitter » HDMI2.0V 1x16 Splitter (3D Ultra HD 4Kx2K@60Hz HDCP2.2)

HDMI2.0V 1x16 Splitter (3D Ultra HD 4Kx2K@60Hz HDCP2.2)

Share to:

  • T-116E
  • Zenhon
Quantity:

HDMI SPLITTER

User Manual








HDMI2.0 1x16 Splitter

(3D Ultra HD 4Kx2K@60Hz HDCP2.2)







Bring High-Definition to your life!







Thank you for purchasing our product. To ensure safety and many years' trouble-free operation of the product, please read the manual carefully before using this product.


1.0 Introduction:

HDMI Splitter is a product which can distribute HDMI signal without loss to one or more high definition display device such as HDTV. It can optimize your home theatre system to the best effect.

HDMI signal is distributed from source device such as DVD, Satellite Receiver, Set-Top Box, DV Camera, A/V Receiver and other HDMI enabled device to high definition display device such as HDTV and HDMI Flat panel Display.


2.0 Features:

1.Compliant with HDMI2.0, HDCP2.2 and DVI 1.0.

2.Support video format up to 4k2k@60Hz with 24bit RGB/YcbCR 4:4:4/YCBCR4:4:4,

and up to 4k2k@60Hz with 12bit YCBCR 4:4:4.

3.Support 3D frame sequential video format up to 1080p@60.

4.Support high resolution VESA mode video format up to QSXGA@60Hz.

5.Support HDR and 18Gbps Signal Speed.

6.Supports LPCM 7.1CH, Dolby True HD, and DTS-HD Master Audio.

7.Compatible with DVI by using HDMI to DVI adapter.

8.Extend the transmission distance and improve transmission signal.

9.Metal casing design and overall shielding without signal interference.

10.Power supply (please refer to technical parameter).


3.0 Packaging accessories:

1. HDMI 1×16 Splitter-----------------------------------------------1 Pcs

2. 5V DC Power Adaptor-------------------------------------------1 Pcs

3. User Manual-------------------------------------------------------1 Pcs


4.0 Technical parameters

HDMI Source Input Port-------------------------------------------------------------------1

Display Device Output Port--------------------------------------------------------------16

Source Port Connector-----------------------------------------------------19 PIN HDMI

Display Device Port Connector-------------------------------------------19 PIN HDMI

HDCP Compliant-------------------------------------------------------------------------YES

Single Link Range--------------------------------------------------------------3840x2160

Input Video Signal-------------------------------------------------------0.5-1.0 Volts P-P

Input DDC Signal---------------------------------------------------------5 Volts P-P(TTL)

Deep Color-------------------------------------------------------------------------------48 Bit

HDMI Version------------------------------------------------------------------------HDMI2.0

Bandwidth----------------------------------------------------------------------Up to 600Mhz

Signal Speed------------------------------------------------------------------Up to 18Gbps

The length of input cable-------------------------------PS4≤10M;BLUE DVD≤10M

The length of output cable------------------------------------------------------------≤10M

The cable standard------------------------------------------------------26AWG HDMI2.0

Vertical Frequency Range-------------------------------------------------------------60Hz

Power Consumption(max.)------------------------------------------------------17.5Watts

Operation Temperature------------------------------------------------------------0℃-70℃

Working Voltage------------------------------------------------------------------------DC 5V

Power Adaptor--------------------------------------------------------------------------5V 3A

Net Weight-------------------------------------------------------------------------------1.3Kg

Dimension: L*W*H(mm)--------------------------------------------------------418x90x25


5.0 Panel Introduction

EDID --------------------------------------------EDID Setting button

IR Ext-----------------------------------------------IR Extension port

L1-L8-------------------------------------------HDMI Input Indicator

Power-------------------------------------------------Power Indicator

Reset-----------------------------------------------------Reset button

ON/OFF-------------------------------------------------Power Switch


DC/5V------------------------------------------------Power Input port

HDMI Output16-1------------------------------HDMI 1-16 outputs

HDMI Input------------------------------------------HDMI Input port


6.0 Connection diagram

Before installation, please make sure all devices you wish to connect have been turned off.

6.01 Connect the HDMI cable between signal source and input port of Splitter.

6.02 Connect the HDMI cable between output port of Splitter and HDTV.

6.03 Connect Splitter and power adapter.

6.04 Open the signal source and the power of HDTV, then it works.

Explanation: With different brands of the input or output device, the length of the connecting cables will differ too.


7.0 EDID Selector: Select HDMI output signal format via EDID Selector.

Number

EDID Selector

Description

1

0000

1080I,Stereo-Audio-2.0

2

0001

1080I,Dolby-DTS-5.1

3

0010

1080I,HD-Audio-7.1

4

0011

1080P,Stereo-Audio-2.0

5

0100

1080P,Dolby-DTS-5.1

6

0101

1080P,HD-Audio-7.1

7

0110

3D,Stereo-Audio-2.0

8

0111

3D,Dolby-DTS-5.1

9

1000

3D,HD-Audio-7.1

10

1001

4K2K@30,Stereo-Audio-2.0

11

1010

4K2K@30,Dolby-DTS-5.1

12

1011

4K2K@30,HD-Audio-7.1

13

1100

4K2K@60,Stereo-Audio-2.0

14

1101

4K2K@60,Dolby-DTS-5.1

15

1110

4K2K@60,HD-Audio-7.1

16

1111

Copy EDID From Sink


8.0 Installation and Precautions

To avoid electric shock , product damage and to protect your safety , please notice the following:

1.Please slowly plug or unplug signal cables and do not often plug , unplug , or shake them.

2.The equipment should not be placed under the sun , rain and damp or unventilated environment.

3.Liquid items should not be placed on the equipment.

4.Do not install the equipment near heat sources such as fire , power , or other amplifiers that produce heat.

5.Do not insert the metal or other objects to the equipment in addition to connecting cables to ports.

6.Do not demolish the equipment by yourself ; it should be maintained by professional maintenance staff.


Contact us
 Shenzhen Parent Factory: 3 Floor, Zhixinmao Technology  Park, Tangxiachong, Songgang, Bao'an District, Shenzhen, China
 Tel: 86-755-27080020
 Changzhou Subsidiary: 87# Gantang Road, Lijia Town, Wujin District, Changzhou City, China
 Tel: +86-519-89198660
 Email: service@zenhon-tech.com
Copyright © 2018 Shenzhen Zenhon Technology Co.,Ltd. All right resolved.              Support By Bullnet  Manage Entrance